Marden Thermographic

Making The Invisible - Visible

Call Me Back

FLIR CM83 600A True RMS Power Clamp Meter

FLIR CM83

product image

The FLIR CM83 is an industrial-grade power clamp meter engineered with advanced power analysis, harmonics measurements, and variable frequency drive (VFD) filtering functions to meet the needs of electrical troubleshooters. The meter features Bluetooth® technology to connect compatible mobile devices for remote viewing and sharing, and METERLiNK® technology to wirelessly embed electrical readings into radiometric infrared images on compatible FLIR thermal cameras.

FLIR CM83 Power Clamp Meter Features

VFD Mode

Accurately analyse non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.

Harmonics Mode

Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.

Phase Rotation

Analyse three-phase systems to measure power draw and verify if power is evenly balanced.

Inrush Current

Measure hard and soft start-up inrush current spikes while equipment is ramping up.

METERLiNK Compatibility

Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.

Power Factor and Active Power

Monitor power quality improvements, such as start-up realignments on three-phase equipment.

Bluetooth Connectivity

Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.

Bright Dual-LED Worklights

Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.

Rugged & Shock-Resistant

Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.





 

Technical Summary Range Basic Accuracy
AC/DC current 600A ±2%
AC/DC voltage 1000V ±1% / 0.7%
Harmonics 1st-25th order ±5%
Total harmonic distortion 0.0 to 99.9% ±3%
Inrush current 600ACA (Integration time 100ms) ±3 %
Active power 10kW to 600kW (10V, 5A min) ±3%
Diode test 0.4 to 0.8V ±0.1V
Capacitance 3.999mF Max ±1.9%
Resistance 99.99kΩ Max ±1%
Continuity threshold 30Ω ±1%
Frequency 20.00Hz to 9.999kHz ±0.5%

 

General Information
Jaw opening 1.45in (37mm, 1000MCM)
Category rating CAT IV-600V, CAT III-1000V
Bluetooth range Max 32ft (10m)
Warranty Limited lifetime*

 

 

Ordering Information

CM83: 600A true RMS AC/DC power clamp
CM83-NIST: CM83 with certificate of traceability to NIST
TA80: CAT IV silicon test leads

 

Contact Us

You are here: Home FLIR Test & Measurement FLIR CM83 600A True RMS Power Clamp Meter

Share on:

Mission & Staff

  • Proviso Systems Ltd
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Wordwide perspectives

Through our wide ranging partnerships and distributor agreements we are able to cater to all markets and customer requirements.